Hydraulic Oil

Product Details:

We are one of the leading Supplier and Distributing the Various Brands Oil , Grease and Engine Oil

Product Details:

We are one of the leading Supplier and Distributing the Various Brands Oil , Grease and Engine Oil

Product Details:

Owing to the wide experience in this domain, we are instrumental in offering Servo System 68 Hydraulic Oil to our clients.

Other Details

• These oils are premium quality anti-wear type lubricants formulated with superior quality of hydro treated base stock.
• They provide long service life and are recommended for hydraulic and circulation systems of a wide variety of equipment.
• These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipment having silver-coated components.
• These oils pass Vickers V-1O4C vane pump test and meet IS 10522-1983 (Reaffirmed 2004) and IPSS 1-09-002 specifications.

 

 

Product Details:

We are offering Valvoline AWH-68 Hydraulic Oil.

Other Details:

• Valvoline Hydraulic Oil are blended from solvent refined, high viscosity index, chemically stable base oils which have been further fortified with anti-oxidant, anti-corrosion, anti-wear and anti-foam additives.
• They comply with the requirements of high-pressure systems and also applications where high pump speeds are experienced.

Application:

• These oils are recommended as fluid media for hydraulic systems operating under moderate to severe operating conditions in stationary and mobile equipments where high pressure gear and vane pumps are used.
• These oils are also recommended for circulation, splash, ring oiling system of the bearings (both plain antifriction), gears of industdal machinery, metal working equipments, servo controls and air compressor applications.

Performance Standards:

• IS 10622:1923
• DIN 61526 Part 2
• Dennison HF-2
• Vickers 1-2005

Performance Benefits:

• Outstanding anti-wear characteristics.
• High chemical stability to ensure long and trouble free service life.
• Excellent foam resistance.
• Good proteclion against rust and corrosion.
• Right viscosity to satisfy the requirement of hydraulic pumps and designed systems.

Product Details:

Servo system oils are premium quality anti- wear type lubricants formulated with superior quality of hydro treated base stock. They provide long service life and are recommended for hydraulic and circulation systems of wide variety of equipment. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipment having silvercoated components. These oils pass Vickers V-1O4C vane pump test and meet IS: 10522-1983 (Reaffirmed 2004) and IPSS 1-09-002 specifications.

Product Details:

Other Details:

• Of the many types of oil products on the market, hydraulic oils are one of the most widely used and have a vast range of applications from hydraulic machinery used to power mechanical shovels, buckets and other earth-moving equipment, to the steering systems of ships and aircraft and to enormous industrial presses capable of exerting thousands of tons of pressure.
• When we want to employ large amounts of power or ensure that mechanical parts work perfectly, we need to be able to count on a hydraulic fluid that provides lubrication and ensures that machinery always functions.
• In this field, Eni is represented by many products with very different characteristics. The common characteristics are the high quality of raw materials and of production methods and the special focus on environmental aspects.

Product Details:

Other Details:

• These oils are blended from highly refined base stock and carefully selected additives.
• These oils are compatible with seals normally used in hydraulic systems.

Performance Benefits:

• Exhibits good oxidation, anti-rust, anti-wear and anti-foam properties.
• Have excellent compatibility with the seals.

Applications:

• These oils are recommended for general hydraulic equipment in control & power transmission systems and for circulating equipments.

Performance Level:

• IS 3098 : 1983 [Reaffirmed Nov., 1998]
• IS 10522 : 1983 [Reaffirmed Nov., 1998]

Our grades meet above specification for the respective viscosity grades.

Product Details:

These oils are blended from highly refined base stock and carefully selected additives. These oils are compatible with seals normally used in hydraulic systems

Product Details:

Other Details:

• Hi-Tec Hydraulic Oil is blended from high-quality mineral oils possessing a high viscosity index and low pour point.
• Hi-Tec Hydraulic Oils provide a long trouble free service life and will be chemically stable under severe operating conditions.
• They give excellent protection against corrosion; resist emulsification and any formation of unwanted stable foam.
• The continuing trend towards higher hydraulic system pressure permits higher performance and reductions in pump and equipment sizes.
• At the same time, the hard-working hydraulic oil is called upon to lubricate, seal and cool the working components under increasing temperature, turbulence and pressure.
• Any entrained air must be readily released as pressures often exceed 7 MPa (1000 psi) and heavy pump water can only be avoided by using oils containing anti-wear additives.
• Hi-Tec Hydraulic Oil is formulated to meet all these requirements, using paraffinic, high viscosity index mineral oil, augmented with performance additives including a zinc anti-wear treatment.

Benefits:

• Superior hydrolytic stability
• Outstanding thermal and oxidation stability
• Good demulsibility and anti-foam properties
• Excellent EP performance
• Excellent rust protection
• Lower tendency to block filters
• Reduced pump wear

Oxidation, wear and corrosion tests established by Dennison and Vickers are amongst the most severe in the industry and are widely recognized by other equipment manufacturers.

Additional Information:

• Item Code: 68

Product Details:

ENKLO oils designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants, anticorrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems also of systems where high pump speeds are encountered.

Product Details:

• Premium quality full synthetic motor oil.
• Formulated for ultimate performance and protection under all operating conditions.
• Designed to fulfill the latest standards of leading engine manufacturers.
• Extreme.
• Premium blue.
• Full synthetic heavy duty diesel.

Product Details:

Other Details:

• It is based upon highly refined mineral oil enhanced with rust and oxidation inhibitors.
• This oil has been reformulated to provide trouble-free lubrication in new sophisticated hydraulic equipment such as NC Plastic Extrusion Machines and equipment incorporating filtration down to 5 microns.
• These machines are particularly prone to spool valve sticking and filter clogging.

Hyspin VG 68 incorporates a low ash additive package which makes it superior to conventional antiwear hydraulic oil through:

• Minimum of metallic additive and therefore ash deposits.
• Less generation of particle matter.
• Unlike normal zinc containing hydraulic oils, is completely stable (non-sludge forming) in presence of moisture.
• Non-aggressive to copper, silver and their alloys.
• More thermally stable under high temperatures.
• Better frictional characteristics. Conventional Zinc containing oils tend to produce stick-slip.

Features:

• Higher level of resistance to wear and oxidation.
• It yields excellent Hydrolytic stab, Filterability and Demulsibility.

N.B.:

• Whilst special precautions are taken during manufacture of Hyspin VG 68 to prevent particulate and metal additive contamination, it is advisable when initial filling new machines to flush system, pump the Hyspin VG 68 out again into the drums in which it was supplied through a 5 micron filter, then pump the oil back into the machine again through 5 micron filter.

 

Oxidation Performance: