Gear Oil

Product Details:

Mak Amocam 320 Gear Oil

MAK Amocam is a range of premium quality, extreme pressure industrial gear lubricants blended from high viscosity index solvent refined high quality base oils. The superior quality sulphur-phosphorus additive chemistry imparts high level of antiwear and extreme pressure property. Their high load carrying capacity and anti-friction property offer excellent performance in industrial gears and other industrial applications. They offer extra protection to the gear teeth, bearings and seals in order to handle severe stresses that occur in heavy duty industrial gears. These oils are not corrosive to copper and copper alloys. Formulated with antifoam, antirust and antioxidation agents they offer excellent lubrication performance and long service life. MAK Amocam oils are compatible with seal materials and paints normally specified for use in industrial gear systems with mineral oils. Grades: MAK Amocam range is available in the following ISO VG grades – 46, 68, 100, 150, 220, 320, 460, 680, 1000 and non-ISO VG grade – 257

Product Details:

Alpha SP 68Mineral gear oil

The Castrol Alpha™ SP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with an extreme pressure additive technology providing good thermal stability and high load carrying capacity. The extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes.

Application:

The Alpha SP range is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP range is compatible with the most common types of seal materials.

Advantages:

Extreme Pressure (EP) performance protect gears against wear and shock-loading as measured by FZG performance and demonstrated extensively in the field. Alpha SP ‘Clean gear’ additive technology provides low deposit formation Good water separation and demulsification High protection against corrosion and wear.

Product Performance Claims:

Specific grades within the Alpha SP range meet the requirements of:

• DIN 51517 Part 3
• AGMA 9005 - E02
• AIST 224
• David Brown S1.53.101 Type E
• SIEMENS MD Rev 13 for Flender Gear Units (ISO VG 150 - 680)

Alpha SP is classified as follows: DIN Classification is CLP